Wheel bearing won't budge

<eBay>" ... and the hole itself is available separately." </eBay>


Regards,

Simonm.

 

Here's a thing that sometimes works and it a bit easier to do now

Go tot he chemists and get some of that Cryogenic freezing wart
removing spray, it's bloody cold stuff so watch out for it.

Heat up the wheel bearing holder with a blow torch and when its VERY
hot, then spray the bearing race with the wart spray.

The logic behind this should be obvious so I wont go into that
--

http://Borg.no-ip.com

XJ900 Trike GS850 Trike

Some people are like slinkys....
no real use but it makes you smile when they fall down stairs!

 

Using the patented Mavis Beacon "Hunt&Peck" Technique, platypus

Heh. Bloke's just moved in three doors up. He's installing an inspection
pit in his garage for his classic cars.

We have an arrangement. :^)

--
Wicked Uncle Nigel - Manufacturer of the "Champion-105" range of rearsets
and Ducati Race Engineer.

WS* GHPOTHUF#24 APOSTLE#14 DLC#1 COFF#20 BOTAFOT#150 HYPO#0(KoTL) IbW#41
SBS#39 Enfield 500 Curry House Racer "The Basmati Rice Burner",
Honda GL1000K2 (On its hols) Kawasaki ZN1300 Voyager "Oh, Oh, It's so big"
Suzuki TS250 "The Africa Single" Yamaha GTS1000

 

Install an access tunnel.

 

Using the patented Mavis Beacon "Hunt&Peck" Technique, platypus

Your occasional moments of lucidity border on genius.

Have you ever been told that?

--
Wicked Uncle Nigel - Manufacturer of the "Champion-105" range of rearsets
and Ducati Race Engineer.

WS* GHPOTHUF#24 APOSTLE#14 DLC#1 COFF#20 BOTAFOT#150 HYPO#0(KoTL) IbW#41
SBS#39 Enfield 500 Curry House Racer "The Basmati Rice Burner",
Honda GL1000K2 (On its hols) Kawasaki ZN1300 Voyager "Oh, Oh, It's so big"
Suzuki TS250 "The Africa Single" Yamaha GTS1000

 

Not by anyone sane.

 

Using the patented Mavis Beacon "Hunt&Peck" Technique, platypus

That's OK then, I'd hate for my GP to be wasting our time.

--
Wicked Uncle Nigel - Manufacturer of the "Champion-105" range of rearsets
and Ducati Race Engineer.

WS* GHPOTHUF#24 APOSTLE#14 DLC#1 COFF#20 BOTAFOT#150 HYPO#0(KoTL) IbW#41
SBS#39 Enfield 500 Curry House Racer "The Basmati Rice Burner",
Honda GL1000K2 (On its hols) Kawasaki ZN1300 Voyager "Oh, Oh, It's so big"
Suzuki TS250 "The Africa Single" Yamaha GTS1000

 

#It's so nice to be insane, nobody asks you to explain...

 

Using the patented Mavis Beacon "Hunt&Peck" Technique, platypus

#A-a-a-angie baby...

--
Wicked Uncle Nigel - Manufacturer of the "Champion-105" range of rearsets
and Ducati Race Engineer.

WS* GHPOTHUF#24 APOSTLE#14 DLC#1 COFF#20 BOTAFOT#150 HYPO#0(KoTL) IbW#41
SBS#39 Enfield 500 Curry House Racer "The Basmati Rice Burner",
Honda GL1000K2 (On its hols) Kawasaki ZN1300 Voyager "Oh, Oh, It's so big"
Suzuki TS250 "The Africa Single" Yamaha GTS1000

 

Hmm. Anyway, today I have been mostly recomponenting the Evil Twin. If
I've got all the electricals in the right places, it may even be running in
a day or two.

 

Using the patented Mavis Beacon "Hunt&Peck" Technique, platypus

I know. I didn't even have to Google. In fact...

<small, small, tiny, almost inaudible voice>

an Itunes impulse buy may have just happened...

Marvellous news! O frabjous day! Callooh! Callay!

--
Wicked Uncle Nigel - Manufacturer of the "Champion-105" range of rearsets
and Ducati Race Engineer.

WS* GHPOTHUF#24 APOSTLE#14 DLC#1 COFF#20 BOTAFOT#150 HYPO#0(KoTL) IbW#41
SBS#39 Enfield 500 Curry House Racer "The Basmati Rice Burner",
Honda GL1000K2 (On its hols) Kawasaki ZN1300 Voyager "Oh, Oh, It's so big"
Suzuki TS250 "The Africa Single" Yamaha GTS1000

 

Considering it's been in dry-dock for a year and a half, it's about time.
I'll put a couple of hundred miles on it to be sure it's working, then send
the heads off to have the valves done. Then I'll thrash the tits off it all
winter.

 

I want a flypress if you're going to sell one to make room.

If you're not where can I get one cheaply?

 

It'll be more cost effective to go to plumber's merchants and get the
pipe freezing spray.

 

Is it your lucky day?
http://www.lotsurf.com/

 

Using the patented Mavis Beacon "Hunt&Peck" Technique, sweller

I'm not. I *think* hydraulic ones are more controllable, but I base this
on pure speculation.

Keep an eye on auction places that deal with closing engineering firms.
There's no shortage, unfortunately. They come up on Ebay reasonably
often as well.

--
Wicked Uncle Nigel - Manufacturer of the "Champion-105" range of rearsets
and Ducati Race Engineer.

WS* GHPOTHUF#24 APOSTLE#14 DLC#1 COFF#20 BOTAFOT#150 HYPO#0(KoTL) IbW#41
SBS#39 Enfield 500 Curry House Racer "The Basmati Rice Burner",
Honda GL1000K2 (On its hols) Kawasaki ZN1300 Voyager "Oh, Oh, It's so big"
Suzuki TS250 "The Africa Single" Yamaha GTS1000

 

Can you suggest any? I'm after a decent pillar drill too.

 

Using the patented Mavis Beacon "Hunt&Peck" Technique, sweller

I just watch my local places. They usually advertise in the local
papers.

--
Wicked Uncle Nigel - Manufacturer of the "Champion-105" range of rearsets
and Ducati Race Engineer.

WS* GHPOTHUF#24 APOSTLE#14 DLC#1 COFF#20 BOTAFOT#150 HYPO#0(KoTL) IbW#41
SBS#39 Enfield 500 Curry House Racer "The Basmati Rice Burner",
Honda GL1000K2 (On its hols) Kawasaki ZN1300 Voyager "Oh, Oh, It's so big"
Suzuki TS250 "The Africa Single" Yamaha GTS1000

 

Not sure the costs of that stuff, but possibly worth knowing the price if
you know it.
--

<--ROT13 it
Spam Trap in Header

http://Borg.no-ip.com
XJ900 Trike GS850 Trike

Some people are like slinkys....
no real use but it makes you smile when they fall down stairs!

 

Maplins do it for 5.99 or so (can't be arsed looking right now). Search
for 'freezer spray' at Maplins.