Technical brake disk question

Discussion in 'UK Motorcycles' started by 'Hog, Aug 22, 2004.

  1. 'Hog

    'Hog Guest

    OK I got this type
    https://www.harris-performance.com/website/acatalog/0203brakekit.jpg AP
    brake kit from an ex BSB privateer. Gave me two sets of disks, this drilled
    type and some of the classic solid grooved type. Fitted the newer type as in
    the pic but they are incredibly loose on the carrier buttons, can move them
    around 2 or 3 mm. I can hear them rattling around as I ride, does anyone
    have experience of them and can comment on whether this is right?

    It is stopping amazingly well though! makes the standard pots seem sick.
     
    'Hog, Aug 22, 2004
    #1

    1. Advertisements

  2. 'Hog

    Ovenpaa Guest

    Floating disks perchance?
     
    Ovenpaa, Aug 22, 2004
    #2

    1. Advertisements

  3. 'Hog

    Daz Guest

    They're fucked. Send them over to me and I'll chuck them in the bin
    for you.
     
    Daz, Aug 22, 2004
    #3
  4. 'Hog

    'Hog Guest

    I have other disks if you are interested!
     
    'Hog, Aug 23, 2004
    #4
  5. 'Hog

    'Hog Guest

    Yeah that sounds about right, thanks. Looked it over last night and there is
    probably scope for distorting/changing the shims to take up a little slack
    and stop them rattling quite so much
     
    'Hog, Aug 23, 2004
    #5

    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. technical revue for Suzuki GN250

  2. Grooves in brake disk?

  3. <soto voce> Brake disk skimming?

  4. Rear disk - question 2

  5. FZX250 front end surgery, and technical question.

  6. Brake disk bolts..

  7. Brake Disk change

  8. FOAK; Brake disk skimming/true-ing?

Loading...