Tarmac interface

Discussion in 'UK Motorcycles' started by Jeremy, Feb 8, 2004.

  1. Jeremy

    Jeremy Guest

    Well, stunned I am.

    First time out on the Fazer after a new pair of BT-010s fitted a couple
    of weeks ago. I knew I had to be careful, but didn't realise just *how*
    careful.

    I had travelled perhaps 120 yards from my house to a T-junction. Pulling
    out into the main road, I opened the throttle in first and *ooops".

    Bike on side, me on floor. The back wheel just lost traction and the
    bike went down, skidding through 180 degrees.

    Thankfully a low-speed affair with just a couple of sore knees for me. A
    scrape on theh can and a bit of the crash bungs worn off. Bit of a
    scrape to the fairing as well and mirror housing.

    So, cold, brand-new tyres = much care required.

    Arse.
     
    Jeremy, Feb 8, 2004
    #1

    1. Advertisements

  2. Jeremy

    Slider Guest

    Sorry to hear that, hope you recover your confidence, knees and finances
    swiftly.
     
    Slider, Feb 8, 2004
    #2

    1. Advertisements

  3. Jeremy

    Nigel Eaton Guest

    Using the patented Mavis Beacon "Hunt&Peck" Technique, Jeremy
    Clumsy ****.
     
    Nigel Eaton, Feb 8, 2004
    #3
  4. Jeremy

    entwisi Guest

    You knew these ^^^^^^^^^^^ were a good investment
    didn't you :eek:)
     
    entwisi, Feb 9, 2004
    #4

    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. 1974 Honda cb360 center stand/exhaust interface

  2. Hand Control Interface Module

  3. What to do? -Tarmac surfing repair

  4. Now that I've sorted the record deck to computer interface sorted ...

  5. Excavator/bridge interface problem....

  6. Coo, didn't know the new eBay interface did that

Loading...