Scooter Soldering Kit Battery

Only on cold days...cold being UNDER 35F. Well that's my definition,
what would I know I've installed AC compressor units when it was 25F.
Getting the torch lit was the hardest part as the winds were a good
bit over 25mph that day. 8^(

Electric soldering irons shouldn't be bothered on windy days unless
it's damn cold.

 

Only on cold days...cold being UNDER 35F. Well that's my definition,
what would I know I've installed AC compressor units when it was 25F.
Getting the torch lit was the hardest part as the winds were a good
bit over 25mph that day. 8^(

Electric soldering irons shouldn't be bothered on windy days unless
it's damn cold.
--
Temperature controlled soldering irons should cope unless its *BLOODY* cold,
the cheaper ones with no thermostat are regulated (of sorts) by a positive
temperature coefficient in the resistance wire the element is wound with. As
the element heats up it's resistance increases so the current draw levels
off, conversely if its cooled the resistance reduces increasing the current
draw.

 

ian field wrote:.

I reckon butane would be better for warming my fingers, wrap some heat
tape around them I guess (assuming the purpose is to repair the wire
to handgrip heaters, ha ha).

 

|>
|>|>
|>|>|>Bob wrote:
|>|>|>...

---------------------------snipped------------------

|>|> That Garage door is an old system, but all the others are newer and
|>|>don't affect me at all since the use more IR/Photo sensors....
|>
|> The only fix there usually is, is to raise the idle "ISC" speed,
|>and the ECU/ECM doesn't do that, as a matter of fact unlike most things of
|>the ECU concerns, the IDLE SPEED is the only thing that CAN'T be Changed...


GOOGLE SEARCH

Yamaha Majesty stalling ECU stall 400 yp400:

(http://majestyusa.com/forums/viewtopic.php?t=758&postdays=0&postorder=asc&highlight=stall&start=15)

(http://www.maxi-scoots.com/postnuke/index.php?name=PNphpBB2&file=viewtopic&p=67998)

(http://majestyusa.com/forums/viewtopic.php?p=24682&sid=c0e70e3df7753fe0c0673f8a70e5fd57)

(http://www.allworldauto.com/comments/yamaha_majesty_comments_and_complaints_109-35494-1.html)

NOT so much this version of the Stalling problem:

(http://justscoot.blogspot.com/2008/04/yamaha-safety-recalls-morphous-majesty.
html)




COPERNIC AGENT SEARCH RESULTS (no google)


Search: ECU Yamaha Majesty 400 stalling stall (All the words)
Found: 15 result(s) on The Web
Date: 02/23/2009 1:41:15 AM

1. Maxi-Scooters! :: View topic - Yamaha Majesty stalling problem
Well, they ended up replacing the ECU and that fixed it perfectly.
.... It's not going to stall again. I have an 06 model that never stalled.
....

http://www.maxi-scoots.com/postnuke/index.php?name=PNphpBB2&file=viewtopic&t=5443
87%

2. MaxMoto - Message Board
Mana now in main agent as the ecu has gone belly up keep hearing
...... Then, I started losing power at take off, stalling at slow speed, and
rough idle. ...... I'm moving from a Yamaha Majesty scooter so the whole
thing felt ...... had gilera 180/ suzuki 4
http://www.maxmoto.co.uk/cgi-bin/maxmoto/msboard.pl?subject=Gilera_Ferro
87%

3. MaxMoto - Message Board
Mana now in main agent as the ecu has gone belly up keep hearing
terrible reports on poor aprillia replacement parts service,so watch this
space. cheers jim ... Then, I started losing power at take off, stalling at
slow speed, and rough idle. Mana is in th

http://www.ask.com/bar?q=ECU+Yamaha...i-bin/maxmoto/msboard.pl?subject=Gilera_Ferro
85%


6. Discover the best world
Yamaha carburetor jets yamaha majesty 400 top speed yamaha fazer
stats yamaha ... Yamaha performance ecu. Yamaha mikuni carb identification.
Yamaha motorcross helmet. ...
http://hhlivefreemedia.com/11/0.html
49%

7. Maxi-Scooters! :: View topic - Yamaha Majesty stalling problem
Well, they ended up replacing the ECU and that fixed it perfectly.
.... It's not going to stall again. I have an 06 model that never stalled.
....

http://www.maxi-scoots.com/postnuke/index.php?name=PNphpBB2&file=viewtopic&p=68186
49%


9. MajestyUSA: Yamaha Majesty Enthusiasts :: View topic - Backfiring
Probably somewhat related to the stalling/ECU issue. ... 2006
Burgman 400 Type S "Ceruleus Angelus" 2005 Yamaha Majesty- Galaxy Blue "His
Majesty" ...
http://majestyusa.com/forums/viewtopic.php?p=16492
48%

10. ScootDawg Scooter Forum - Took Delivery of my 2005 Majesty!!
I have scheduled to take it to the dealer for the recall, including
the ECU, this Friday. ... What I mean by stalling is actually dying. I come
to a stop light ...

http://scootdawg.proboards59.com/index.cgi?board=200cc&action=display&thread=16336&page=2
42%


12. Maxi-Scooters! :: View topic - Tell me the negative points.
I have never had a Yamaha sport bike with carbs stall on me, ever.
.... 2005 Yamaha Majesty 400. dandrewk - Oct 02, 2006 - 10:11 AM. Post
subject: ...

http://www.maxi-scoots.com/postnuke/index.php?name=PNphpBB2&file=printview&t=104&start=45
36%

13. www.BurgmanUSA.com • View topic - Burgman 400 Review (Aussie-spec
model)
... Control Unit which caused very occasional stalling, but this
was fixed by a recall. ... What about the Yamaha Majesty 400? ...
http://burgmanusa.com/forums/viewtopic.php?t=23404
33%

14. 1991 CHEVROLET BERETTA User Comment / Complaint
2005 yamaha majesty flutters, stall and turns itself off
periodically with no warning. ... the scooter used and the stalling
occurred the second week i had ...

http://www.allworldauto.com/comments/1991_chevrolet_beretta_comments_and_complaints_5783.html
29%

15. Soccerphile Football | Soccer Blog: June 2008
skip to main | skip to sidebar ... Monday, June 30, 2008 ... All
hail the reign of the beautiful Spain...

http://www.ask.com/bar?q=ECU+Yamaha...cerphile.blogspot.com/2008_06_01_archive.html
23%

 

SNIP

<innocent look> wot are those and who needs 'em. Use Hippo hands r bar
end covers of somebrand or other. Good for all day at 70+ @ 22F...not
that I'd do such a thing on the plains of Montana.

 

PHucker has a hot air problem!

 

You are talking utter rubbish. Take your grudge match elsewhere because
nobody's interested here.

 

If this illiterate diatribe is the sort of thing you sent to Yamaha, no
wonder they ignored you.

I bet you wrote in purple crayon, as well.

As for ng dictator - what has that got to do with you telling the world
that all singles won't tick over at less than 1600rpm? That was, and
remains, rubbish.

 

yeah and he's full of it about single cyl idle rpm. Utter crap aamof.

 

So? He's right and you are full of shit mostly. I've two thumpres that
idle at less than 1,300rpm. Ergo your full of it. For that matter I'm
sure there are single 4stroks of UNDER 25cc that Idle around 1,100rpm.
Naturally you'll say it is a lie...wont you francis.

 

SNIP

Utterly untrue adn it's a load of fetid dingos kidneys also.

 

Except you. Your life's work is following endless inane threads.

 

Too late, Piggy seized power in this NG ten years ago and defends it
with a sharp-tongued wit.

 

I hope Piggy doesn't damage your delicate tissues which his sharp-
pointed tongue...

Here's some zoophilic porn to excite you:

http://images.craigslist.org/3nc3p73o1ZZZZZZZZZ93f32f4e27b61f312ed.jpg

 

On Sun, 15 Mar 2009 18:08:13 -0700 (PDT), Schiffner

|>
|>So? He's right and you are full of shit mostly. I've two thumpres that
|>idle at less than 1,300rpm. Ergo your full of it. For that matter I'm
|>sure there are single 4stroks of UNDER 25cc that Idle around 1,100rpm.
|>Naturally you'll say it is a lie...wont you francis.

Yamaha yp400ts only idle at 1300/1500rpms and that can get iffy in
4stroke single..

Let's say a Vino 125cc needs 1500cc and 1650ccs when broken in, look
it up it's on google somewhere just like all the stuff I said and you
denied...

 

On Sun, 15 Mar 2009 18:09:18 -0700 (PDT), Schiffner

|>>         I swear any Single Cylinder 4 Stroke, needs a good 1600rpms to IDLE
|>> properly and reliably.......some need even more.
|>>
|>
|>
|>Utterly untrue adn it's a load of fetid dingos kidneys also

Ya got a real mouth for a keyboard......limy!

 

|>> On Sun, 15 Mar 2009 12:06:25 +0000, (Piggy) wrote: (snip)
|>
|>>         Don't appoint yourself as a usenet NG dictator till you pay your
|>> bills to the fuhrer of lloyds of london....which at last glance were well
|>> over 400 trillion pounds below BEP....
|>
|>Too late, Piggy seized power in this NG ten years ago and defends it
|>with a sharp-tongued wit.
|>
I was here 10 years before that.......so what....this is not about
fanning your tail feathers, this is a bout getting the facts right about
scooters....

If you don't remember, I been driving them for 30 years, I do my own
work when I have the room!

 

On Sun, 15 Mar 2009 18:05:55 -0700 (PDT), Schiffner

|>On Mar 15, 6:06 am, (The Older
|>Gentleman) wrote:
|>> > I swear any Single Cylinder 4 Stroke, needs a good 1600rpms to IDLE
|>> > properly and reliably.......some need even more.
|>>
|>> You are talking utter rubbish. Take your grudge match elsewhere because
|>> nobody's interested here.
|>
|>yeah and he's full of it about single cyl idle rpm. Utter crap aamof.

So you still denying ALL of this like Piggy....fine:


GOOGLE SEARCH

Yamaha Majesty ECU 400 yp400** stalling:


http://majestyusa.com/forums/viewtopic.php?t=758&postdays=0&postorder=asc&highlight=stall&start=15



http://www.maxi-scoots.com/postnuke/index.php?name=PNphpBB2&file=viewtopic&p=67998



http://majestyusa.com/forums/viewtopic.php?p=24682&sid=c0e70e3df7753fe0c0673f8a70e5fd57



http://www.allworldauto.com/comments/yamaha_majesty_comments_and_complaints_109-35494-1.html


NOT so much this version of the Stalling problem:


http://justscoot.blogspot.com/2008/04/yamaha-safety-recalls-morphous-majesty
..
html




COPERNIC AGENT SEARCH RESULTS no google


Search: ECU Yamaha Majesty 400 stalling stall All the words
Found: 15 results on The Web
Date: 02/23/2009 1:41:15 AM

1. Maxi-Scooters! :: View topic - Yamaha Majesty stalling
problem
Well, they ended up replacing the ECU and that fixed it
perfectly.
.... It's not going to stall again. I have an 06 model that never stalled.
....

http://www.maxi-scoots.com/postnuke/index.php?name=PNphpBB2&file=viewtopic&t=5443

87%

2. MaxMoto - Message Board
Mana now in main agent as the ecu has gone belly up keep
hearing
...... Then, I started losing power at take off, stalling at slow speed,
and
rough idle. ...... I'm moving from a Yamaha Majesty scooter so the whole
thing felt ...... had gilera 180/ suzuki 4
http://www.maxmoto.co.uk/cgi-bin/maxmoto/msboard.pl?subject=Gilera_Ferro
87%

3. MaxMoto - Message Board
Mana now in main agent as the ecu has gone belly up keep
hearing
terrible reports on poor aprillia replacement parts service,so watch this
space. cheers jim ... Then, I started losing power at take off, stalling
at
slow speed, and rough idle. Mana is in th

http://www.ask.com/bar?q=ECU+Yamaha+Majesty+400+stalling+stall&page=1&qsrc=0&zoom=What+Does+
<KW>ECU</KW>+Stand+for|<KW>ECU</KW>+Repair|<KW>ECU</KW>+Chips&ab=0&u=http://www.maxmoto.co.uk/cgi-bin/maxmoto/msboard.pl?subject=Gilera_Ferro
85%


6. Discover the best world
Yamaha carburetor jets yamaha majesty 400 top speed
yamaha fazer
stats yamaha ... Yamaha performance ecu. Yamaha mikuni carb
identification.
Yamaha motorcross helmet. ...
http://hhlivefreemedia.com/11/0.html
49%

7. Maxi-Scooters! :: View topic - Yamaha Majesty stalling
problem
Well, they ended up replacing the ECU and that fixed it
perfectly.
.... It's not going to stall again. I have an 06 model that never stalled.
....

http://www.maxi-scoots.com/postnuke/index.php?name=PNphpBB2&file=viewtopic&p=68186

49%


9. MajestyUSA: Yamaha Majesty Enthusiasts :: View topic -
Backfiring
Probably somewhat related to the stalling/ECU issue. ...
2006
Burgman 400 Type S "Ceruleus Angelus" 2005 Yamaha Majesty- Galaxy Blue
"His
Majesty" ...
http://majestyusa.com/forums/viewtopic.php?p=16492
48%

10. ScootDawg Scooter Forum - Took Delivery of my 2005
Majesty!!
I have scheduled to take it to the dealer for the recall,
including
the ECU, this Friday. ... What I mean by stalling is actually dying. I
come
to a stop light ...

http://scootdawg.proboards59.com/index.cgi?board=200cc&action=display&thread=16336&page=2

42%


12. Maxi-Scooters! :: View topic - Tell me the negative
points.
I have never had a Yamaha sport bike with carbs stall on
me, ever.
.... 2005 Yamaha Majesty 400. dandrewk - Oct 02, 2006 - 10:11 AM. Post
subject: ...

http://www.maxi-scoots.com/postnuke/index.php?name=PNphpBB2&file=printview&t=104&start=45

36%

13. www.BurgmanUSA.com * View topic - Burgman 400 Review
Aussie-spec
model
... Control Unit which caused very occasional stalling,
but this
was fixed by a recall. ... What about the Yamaha Majesty 400? ...
http://burgmanusa.com/forums/viewtopic.php?t=23404
33%

14. 1991 CHEVROLET BERETTA User Comment / Complaint
2005 yamaha majesty flutters, stall and turns itself off
periodically with no warning. ... the scooter used and the stalling
occurred the second week i had ...

http://www.allworldauto.com/comments/1991_chevrolet_beretta_comments_and_complaints_5783.html

29%

15. Soccerphile Football | Soccer Blog: June 2008
skip to main | skip to sidebar ... Monday, June 30, 2008
.... All
hail the reign of the beautiful Spain...

http://www.ask.com/bar?q=ECU+Yamaha+Majesty+400+stalling+stall&page=2&qsrc=0&zoom=What+Does+
<KW>ECU</KW>+Stand+for|<KW>ECU</KW>+Repair|<KW>ECU</KW>+Chips&ab=9&u=http://soccerphile.blogspot.com/2008_06_01_archive.html
23%

 

On Sun, 15 Mar 2009 18:08:13 -0700 (PDT), Schiffner

|>>         Don't appoint yourself as a usenet NG dictator till you pay your
|>> bills to the fuhrer of lloyds of london....which at last glance were well
|>> over 400 trillion pounds below BEP....
|>> --
|>
|>
|>So? He's right and you are full of shit mostly. I've two thumpres that
|>idle at less than 1,300rpm. Ergo your full of it. For that matter I'm
|>sure there are single 4stroks of UNDER 25cc that Idle around 1,100rpm.
|>Naturally you'll say it is a lie...wont you francis.

Thumper majesty 400 less than 1,300rpm, it's not in the quartz timed
ECU...or the tach reading is wrong......try again...

I'm talking about reliably....infalibly under ALL RF interferences,
mine seems to have the same problem as most when it was resolved 2 years
ago...

 

|>If this illiterate diatribe is the sort of thing you sent to Yamaha, no
|>wonder they ignored you.
|>
It ain't...
|>I bet you wrote in purple crayon, as well.
|>
No......just B&W recycled electrons....

|>As for ng dictator - what has that got to do with you telling the world
|>that all singles won't tick over at less than 1600rpm? That was, and
|>remains, rubbish.

Well I was referring to the Yamaha Majesty, my Honda Elite ch250
likes it best like that too, especially in hot dusty or rainy summer
days....somtimes the -10C with -20c dewpoint affects it too....

I mean reliable as in infallible, it still stalls at the garage door
RF beam crossing, then the guillotine door comes down....

Is this a concern, it is if you just jump started a 10 volt battery
and aren;t too sure if it's gonna start on 5 minutes of idling....it usually
does, but it chokes on unshielded HOT RF places only.....