R6 Repairs

Does anybody know if there is an electronic version of the R6 Service manual
online anywhere?

Also, I sort of came off my R6 this weekend and ground a hole in my
righthand engine casing. Does anybody have any tips to ensure there is no
bits of racetrack inside my engine after I flush it with oil?

Thanks

R6 Crash Test dummy

 

You weren't at Donington Saturday were you?

--
Daz
GSXR1000K2 - Fun
CB250 - Purpose
Fazer600 - Bit of both
CBR600 - Racer
MRO#26 | FOT#115 | FOF#48 | two#41
http://www.highsideuk.com
ukrm at btopenworld dot com

 

I've tried quite a few of them but always end up coming back to OE6.

--
cane [at] ukrm.org ¦ fireblade, r30
botafo t#50 f#03 YTC #15 bbb #6 apostle [kotl]
New? http://www.ukrm.net/faq/ukrmscbt.html
Rideout? http://www.horrible.demon.co.uk/botafof/
"Brace yourselves ladies, I'm coming in dry"

 

[snip]

I'm working on it.... maybe one day I'll get one of those 'proper' news
clients that people keep harking on about

 

I bet you were.

Never mind. Before you crash and burn here too. Read this
http://www.ukrm.net/faq/ukrmscbt.html and post your replies at the bottom.

--
cane [at] ukrm.org ¦ fireblade, r30
botafo t#50 f#03 YTC #15 bbb #6 apostle [kotl]
New? http://www.ukrm.net/faq/ukrmscbt.html
Rideout? http://www.horrible.demon.co.uk/botafof/
"Brace yourselves ladies, I'm coming in dry"

 

Really simple is it?

--
cane [at] ukrm.org ¦ fireblade, r30
botafo t#50 f#03 YTC #15 bbb #6 apostle [kotl]
New? http://www.ukrm.net/faq/ukrmscbt.html
Rideout? http://www.horrible.demon.co.uk/botafof/
"Brace yourselves ladies, I'm coming in dry"

 

If you were a Linux nerd, PAN would suit you perfectly.

 

^^^^^^^^^

YM "pikey's".

HTH.

 

<snip>

I was there on my Gixxer in the fast group. It's unlikely but there
maybe a picture of you on my website...

http://www.highsideuk.com/bikes/trackdays/donington/200903/images.asp

--
Daz
GSXR1000K2 - Fun
CB250 - Purpose
Fazer600 - Bit of both
CBR600 - Racer
MRO#26 | FOT#115 | FOF#48 | two#41
http://www.highsideuk.com
ukrm at btopenworld dot com

 

On page 2, 6 down on the left, is there some guy with his knee almost down
on a bike that's almost upright? Why can't I do that?

 

If you're on about the guy on the Ducati that has to be the most
bizarre kneedown position I've ever seen.

He's also here...

http://www.highsideuk.com/includes/...mages/trackdays/donington/200903/image050.jpg

He's hanging off *specifically* to GHKD. If his body position was
correct he'd do it without having to hang off half as much.

--
Daz
GSXR1000K2 - Fun
CB250 - Purpose
Fazer600 - Bit of both
CBR600 - Racer
MRO#26 | FOT#115 | FOF#48 | two#41
http://www.highsideuk.com
ukrm at btopenworld dot com

 

Nah, not on there, but as i only lasted 1 session and 3 laps it's not
surprising really.

My own stupid fault, trying to get my knee down. When i did it was quickly
followed by bum, back, shoulder and elbow.

On Friday I told the missus I needed a new bike. She commented on there
being nothing wrong with this one. I like to get my own way ;-)

 

This is so true.

Now, tell us your autoroute knee down story...

 

GP

--
Daz
GSXR1000K2 - Fun
CB250 - Purpose
Fazer600 - Bit of both
CBR600 - Racer
MRO#26 | FOT#115 | FOF#48 | two#41
http://www.highsideuk.com
ukrm at btopenworld dot com

 

Yeah, that's the one. That can't look too good in real life surely. I'd spit
my icecream out if I saw that going on.

 

The first time I tried that I found a bit of dual carriageway with a couple
of roundabouts about 1 mile apart. I had a stab at it by doing a 180 then
had a mile to compose meself before setting up and having another go. Repeat
above excercise until a) you do it, b) you fall off, c) you run out of
motion lotion.

 

Bugger

 

If anyone knows of Kwaka GPz Manuals online I would like to hear bout that
too!

 

Heh - I do that all the time, for a laugh. That reminds me - must pester
Veggie Dave for a copy of that video of me GMKD at walking pace. And the one
of me doing the same and umm... getting the bars down shortly afterwards.