Question for Cane

Discussion in 'UK Motorcycles' started by 'Hog, Aug 11, 2004.

  1. 'Hog

    'Hog Guest

    Yeah I know you are only on the marketing side but you must know something
    about the product.

    Want to make custom high screen for the Gixxer.
    Process years ago was make up template in cardboard, lay on plastic sheet,
    cut, fasten roughly in place and refine shape/de-stress with hot air gun.

    What would be the best non-brittle clear plastic material to use for this?
    something around 4mm thick I should guess. IIRC we used something quite like
    Bob heath visor material.

    If your company was to be sent the template could you cut a few blanks out
    for appropriate amounts of beer tokens? if it works out I'll distribute to
    any Gixxer owners hereabouts who also want. The standard screen is way too
    low.
     
    'Hog, Aug 11, 2004
    #1
    1. Advertisements

  2. 'Hog

    'Hog Guest

    Hmm they all seem familiar!
    Now that's the sort of info I need
    But it doesn't exist yet! and because it's being done in such a simple way
    it has to be kinda 2D. Making it 3D isn't something one could easily do in
    the domestic garage? Last time we did a 2D type for an Exup it was easy
    enough except for the cutting of the plastic around the former.
     
    'Hog, Aug 11, 2004
    #2
    1. Advertisements

  3. 'Hog

    dundonald Guest


    --
     
    dundonald, Aug 11, 2004
    #3
  4. 'Hog

    dundonald Guest

    'bird' isn't used anymore? Crap...

    <snip>

    --
     
    dundonald, Aug 11, 2004
    #4
  5. 'Hog

    Linger Guest

    That'll be post op then.
     
    Linger, Aug 12, 2004
    #5
  6. Your place has changed a lot in the past 6 months then.
     
    William Grainger, Aug 12, 2004
    #6
  7. 'Hog

    'Hog Guest

    I am much obliged, there are probably three or four bods on the NG who could
    do with a higher GSXR screen. I'm getting carried away now wondering how to
    produce a 3D screen, best I can think of so far is a surform and a block of
    high density polystyrene?
     
    'Hog, Aug 12, 2004
    #7
  8. 'Hog

    Porl Guest

    I've just bought two. I'm selling the black opaque one on ebay.
     
    Porl, Aug 12, 2004
    #8
  9. 'Hog

    'Hog Guest

    I have a double bubble, still about 6 inches too low for sustained Eire
    forays.
     
    'Hog, Aug 12, 2004
    #9
  10. 'Hog

    Ace Guest

    I think he was implying something higher than a duoble-bubble.
    Why? I mean, why did you get two in the first place, and why junk the
    Opaque one?
     
    Ace, Aug 12, 2004
    #10
  11. 'Hog

    Porl Guest

    Well I thought I was buying a black one as in a "black visor" black, not
    opaque black. It looks pretty good but isn't much use when tucked under it
    hammering down a track straight. Stupidely I used it instead of sending it
    back for replacment.
     
    Porl, Aug 12, 2004
    #11
  12. 'Hog

    Ace Guest

    As I said when you were over here, I deliberately got the opaque one,
    on the basis that I _never_ look through the screen anyway. My height
    and bad neck wouldn't allow me to get down that low for more than a
    few seconds at a time, plus I find the d-b gives ample wind protection
    even with my eyes above the screen level.
     
    Ace, Aug 12, 2004
    #12
  13. 'Hog

    Porl Guest

    I should have paid more attention.
     
    Porl, Aug 12, 2004
    #13
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.