Paging Daz

Discussion in 'UK Motorcycles' started by Lozzo, May 27, 2005.

  1. Lozzo

    Lozzo Guest

    http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=7976061920&rd=1
    &sspagename=STRK%3AMEWA%3AIT&rd=1

    Are these the same as the calipers you fitted to your Gixer thou race
    bike?

    I ask because I may need to buy replacement calipers for my old 9R and
    I want to fit something better and less likely to give hassle than the
    original 6 pots. Having looked around some race sites they all say fit
    the 750 calipers, but they aren't specific about which model. I've
    measured Elly's bike and 90mm centres seems to be right.
     
    Lozzo, May 27, 2005
    #1
    1. Advertisements

  2. Lozzo

    Lozzo Guest

    Lozzo says...
    Bad form etc etc

    I've looked a little further and those calipers on eBay are the same as
    ZZR1100 ones, which I know from experience are complete shite.
     
    Lozzo, May 27, 2005
    #2
    1. Advertisements

  3. Lozzo

    Daz Guest

    Hang on...

    <fx: Runs off down to garage>

    They are approx. 60mm centres on mine so no they aren't the ones. The
    ones I fitted were from a GSXR750 *K1*.
     
    Daz, May 27, 2005
    #3
  4. Lozzo

    Lozzo Guest

    Daz says...
    Yeah I realised that after I measured my own bike. Thanks anyway.
     
    Lozzo, May 27, 2005
    #4
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.