NX650 Dominator

Discussion in 'UK Motorcycles' started by John Munro, Jul 21, 2004.

  1. John Munro

    John Munro Guest

    So I took the oil pipe that feeds the cams off because
    it had a slight oil seepage and I'm gonna replace the copper washers.
    But, now both banjo bolts are off I now realise they are different.
    And obviously I Don't know which is which now <thud>
    They are both exactly the same except one has a _larger_ diameter oil
    hole on the side..
    The pipe goes from the oil filter housing to the top end.
    The Honda workshop manual does not differentiate between the 2 bolts.
    I reckon the smaller holed one goes to the top. Anyone?
     
    John Munro, Jul 21, 2004
    #1

    1. Advertisements

  2. John Munro

    OH- Guest

    1+2 = 2+1

    Or maybe a little more clear - the oil does not care where you
    restrict the flow, the pressure drop will be the same.
     
    OH-, Jul 21, 2004
    #2

    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Norton Dominator

  2. Cam Chain Noise On Honda NX650

  3. Honda nx650 dominator parts list

  4. Dominator missfire

  5. Dominator

  6. Honda NX650 Dominator

  7. FS Honda NX650 Dominator

  8. NX650 wheel bearings

Loading...