Leather Jackets and Leather Seat care and preservation

Our Company Liquiguard Technologies Inc. is an innovator of new and
unique protective coatings for use on everyday objects and specialized
applications. Commonly available coatings have a basic polymer
composition. Liquiguard Technologies coatings are complex formulations
that will meet and exceed the requirements of the job at hand. Most of
our coatings are water based, eco friendly and present no health
hazards. They are clear, non-odorous and contain additives that
discourage the growth of mold, mildew and other fungi. They contain
inhibitors to prevent damage caused by invisible but harmful
ultraviolet rays. Liquiguard Technologies development focus is to
create application specific coatings that are the best in class.
Coatings developed by us in our laboratories utilize the latest
innovations in polymer
technology. Our formulations focus on specific groups of materials and
objects that need to be protected from hazards encountered during
every day use. We pride ourselves on developing solutions that are
truly effective and long lasting we have developed a very special
product by the name of Leatherguard.

Leatherguard is a clear coating designed to protect and enhance the
longevity of all natural leather products including handbags, shoes,
jackets, gloves, etc. however Leatherguard is also the perfect way to
protect your car interior in addition to the typical areas such as
front and rear seats, Leatherguard is great for leather wrapped
steering wheels and gearshifts. It is totally non-staining and will
not affect the color or appearance of the coated object. When applied
correctly Leatherguard will extend the useful life of leather goods by
enhancing their suppleness and resistance to scratching and scuffing
thus keeping the coated articles looking like new. The high
flexibility and adhesion inherent in this coating prevents it from
cracking or peeling during normal use. Leatherguard also prevents soil
and dirt from sticking to it, unlike existing Silicon based
treatments.

Formulated from a blend of complex and innovative new resins,
Leatherguard is a water based, odorless, non-yellowing and
non-polluting coating unlike any other available in the market today.
More than a moisture repellant it is the first truly protective
coating that can withstand spills of water, beverages, wine and other
non-corrosive liquids while keeping the coated objects free from mold,
mildew and other fungi. Leatherguard contains unique ultraviolet
inhibitors that will protect the leather from damage caused by
exposure to sunlight, thus extending the life of the leather articles.
If needed, coated articles can also be wiped down with warm water and
mild detergents.

Leatherguard can be sprayed or brushed on to the art objects quickly
and easily and will become tack free in 20 to 30 minutes at an ambient
temperature of 77°F. To achieve optimal results, however, a drying
time of approximately 72 hours is recommended. The fully dried
Leatherguard film is highly durable and will stay in place and
continue to provide optimal protection until physically removed or
rubbed off.

To ensure that your leather article is fully protected, Leatherguard
contains a special "tracer dye" that glows when exposed to ultraviolet
light. Missing or inadequate amount of Leatherguard can be easily
detected by the absence of the telltale glow when the coated article
is exposed to a UV source. If too little Leatherguard has been
applied, simply apply another coating to correct the problem.

Leatherguard is 100% water based and is available in aerosol cans,
quart, gallon and five gallon containers. Aerosol cans contain solvent
based propellants. Larger packing sizes contain concentrates which
must be diluted with tap water. The recommended dilution is 2 or 3
parts of water to 1 part of concentrate.

To remove Leatherguard coating from treated surfaces, use warm water
and mild detergents or isopropyl alcohol. Do not use corrosive
cleaners or strong solvents.

Leatherguard is non-toxic and environmentally safe.


PRODUCT USAGE INFO
1. Surface to be laminated must be free of dirt, oil, grease and other
loose debris.
2. Damp or wet objects should be thoroughly dried before coating.
3. Make sure that Leatherguard and ambient temperature are at 50° F or
higher.
4. Shake the aerosol can well before and frequently during use.
5. Hold the can upright and about 12 inches away from the surface to
be sprayed.
6. Spray from all four sides of the object to be coated to ensure
complete coverage. This constitutes one coating cycle.
7. Porous surfaces may require more than one coating cycle for optimal
protection.
8. Each coating must be partially dry prior to application of
additional coatings.
9. For maximum protection coat all exposed surfaces.
CAUTION: Propellants within the aerosol contain volatile solvents that
can ignite easily. Keep away from open flame sparks or heat. Prolonged
exposure to sunlight may expand the pressurized solvents and the can
could explode. Do not puncture or incinerate. Do not store at
temperatures above 120ºF. Vapor harmful. Use with adequate
ventilation. Avoid contact with eyes and skin and prolonged exposure
to vapors. If swallowed do not induce vomiting. Seek immediate medical
attention.
LEGAL INFO
LIQUIGUARD TECHNOLOGIES, INC. WARRANTIES THAT A PROPERLY COATED OBJECT
WILL NOT SUFFER DAMAGE FROM HUMIDITY, MOISTURE, LIMITED EXPOSURE TO
NON-CORROSIVE LIQUIDS AND ULTRAVIOLET RAYS. USER IS SOLELY RESPONSIBLE
FOR DETERMINING SUITABILITY FOR IN ENDED USE AND ASSUMES ALL RISKS IN
CONNECTION THEREWITH OTHER THAN AS WARRANTED HEREIN. WARRANTY EXTENDS
TO ORIGINAL PURCHASER AND MAY NOT BE ASSIGNED OR TRANSFERRED. WARRANTY
DOES NOT APPLY TO COATED OBJECT THAT HAS BEEN REWORKED, PHYSICALLY
DAMAGED OR ABUSED AND PROVIDES NO LIABILITY FOR ANY INCIDENTAL OR
CONSEQUENTIAL LOSS OR DAMAGE TO COATED OBJECTS. THIS LIMITED WARRANTY
IS IN LIEU OF ALL OTHER EXPRESS OR IMPLIED WARRANTIES INCLUDING
MERCHANTABILITY, FITNESS FOR USE OR FOR A PARTICULAR PURPOSE.


This article is for information purposes only and is not intended to
solicit or sell anything for more information please visit our website
at http://www.Liquiguard.com or email:

 

No way you're gonna sell that here - if we can't agree on our HDs, Hondas,
Aprilias, Yamahas et al, we do agree only Brylcreem is the ticket for our
leathers. Apply liberally to hair, allow to run onto jacket and chaps or
race skins, and then swirl in with hand until absorbed.

Dun be advertising here, dude.