Honda gl 1100 1980 rpm drops too slow down to idle

Discussion in 'Motorbike Technical Discussion' started by yarbel, Aug 5, 2007.

  1. yarbel

    yarbel Guest

    So I have a problem here
    My gl 1100 takes too long to drop the rpm for up shifting or generally
    down to idle.
    I have rebuilt the carburetor (cleaned and replaced all the rubber
    parts and screens with new, I have oiled the diaphragms) the throttle
    cable returns swiftly and is not the problem, the vacuum advance from
    the back of the engine seems to work fine and no leaks detected on the
    way to the carb.
    Any thoughts? I am at a loss here!
     
    yarbel, Aug 5, 2007
    #1

    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. need a speedometer to fit a 1980 Honda Goldwing GL 1100

  2. 1980 Yamaha SR250G-R - Just wont idle - cleaned carb twice.

  3. Idle will not go below 4000 RPM

  4. Suzuki GSX 250 1980 stalls and idle speed drops to zero

  5. 1994 Honda Nighthawk Idle too High & Clutch Question

  6. 1975 Honda CB750K5 uneven idle, stalls below 1000 rpm

  7. idle jet on 750quad-what rpm range is affected?

  8. ZX6R power drops off >8k rpm

Loading...