GL1500 carb balancing.

Discussion in 'UK Motorcycles' started by SD, Jan 21, 2007.

  1. SD wrote
    Or, you could borrow an additional 4 wotsit carb balancing thingy from
    someone who lives not a million miles away down the road from you and
    who just happens to have one and don't use two of it's bits.
     
    steve auvache, Jan 22, 2007
    #21
    1. Advertisements

  2. I wasn't suggesting to connect them *all* together, I was suggesting
    connecting carb 1 to columns 1 and 2, and carb 2 to columns 3 and 4.
    I'll spare you the ASCII art :) The depression in each carb would
    therefore be supporting double the normal number of inches of Hg. I think.


    I think that would make the engine run very lean. I have no idea whether
    this would be an issue or not for your purposes.

    Mark
     
    Mark Clements, Jan 22, 2007
    #22
    1. Advertisements

  3. SD

    Robbo Guest

    You misunderstand, Mr TOG. The aforementioned garment belongs to Mr R.
    Obbo, and as I'm supposed to be delivering it to him, I sensed an
    opportunity to kill two birds with one stone, as it were.

    This in no way is an attempt to pooh-pooh your own offer, which I was
    in the middle of replying to when you responded to my reply to Robbo.

    Should the Kentish Klown be unavailable, I would be delighted to
    borrow your gauges, especially having seen the price of a new set.

    Especially if I consider I might need a six-set for the CBX.

    ObCBX - set of engine bars just gone on Ebay - £335! Glad the seller
    threw a freshly chromed set in when I bought mine.[/QUOTE]


    Well I *was* going to lend them to you but your reference to the Kentish
    Klown part scuppered that idea!
    As for the KW Jumper chuck it or donate it to a homeless tramp or somesuch,
    after all there are plenty on the Isle of Dogs in ESSEX

    I'm sure Mr Murrays equipment is in fine working order so perhaps his would
    be the preferred choice as he effectively lives in Surrey, much more upper
    class than an island of canines
     
    Robbo, Jan 22, 2007
    #23
  4. Using the patented Mavis Beacon "Hunt&Peck" Technique, Robbo
    Nice flounce.

    --
    Wicked Uncle Nigel - Podium Placed Ducati Race Engineer as featured in
    Performance Bikes and Fast Bikes

    WS* GHPOTHUF#24 APOSTLE#14 DLC#1 COFF#20 BOTAFOT#150 HYPO#0(KoTL) IbW#41
    SBS#39 OMF#6 Enfield 500 Curry House Racer "The Basmati Rice Burner",
    Honda GL1000K2 (On its hols) Kawasaki ZN1300 Voyager "Oh, Oh, It's so big"
    Suzuki TS250 "The Africa Single" Yamaha Vmax Honda ST1100 wiv trailer
     
    Wicked Uncle Nigel, Jan 22, 2007
    #24
  5. SD

    Robbo Guest

    I thangyou
     
    Robbo, Jan 22, 2007
    #25
  6. SD

    SaladDodger Guest

    I'm sorry, I genuinely thought you *were* from Kent.

    Anyway, what evening's good for you?
     
    SaladDodger, Jan 22, 2007
    #26
  7. SD

    Robbo Guest

    I *am* from Kent you numpty.....It was the Klown description that irked me.
    Evenin?
    Is there anything wrong with Saturday then?
    I can get the gauges back off my mate by then.
     
    Robbo, Jan 22, 2007
    #27
  8. SD

    SD Guest

    Gettoff, you big lummox. If I wanted to offend, it would have been
    obvious.
    "Make it so, number one."

    Satdy afternoon? Snow permitting.
    --
    | ___ Salad Dodger
    |/ \
    _/_____\_ GL1500SEV/CBR1100XXX/CBX1000Z
    |_\_____/_| ..87918../..23274.../..31893.
    (>|_|_|<) TPPFATUICG#7 DIAABTCOD#9 WG*
    |__|_|__| BOTAFOT #70 BOTAFOF #09 PM#5
    \ |^| / IbW#0 & KotIbW# BotTOS#6 GP#4
    \|^|/ ANORAK#17 IbB#4 YTC#4 two#11
    '^' RBR Clues: 00 Pts:0000 Miles:0000
     
    SD, Jan 22, 2007
    #28
  9. SD

    platypus Guest

    I find that, in general, I can offend people more by calling them clowns
    than I can by calling them cunts.
     
    platypus, Jan 22, 2007
    #29
  10. SD

    Robbo Guest

    At least it a little more polite calling them clowns rather than cunts.
    Although the general feeling of derision is similar.
     
    Robbo, Jan 23, 2007
    #30
  11. SD

    Robbo Guest

    Yah got me number still?
    Let me know what time Sat afnoon and I'll sort the gauges.
    Assuming you bring yer passport across the water to the haloed ground that
    is Kent
     
    Robbo, Jan 23, 2007
    #31
  12. SD

    platypus Guest

    If - in an office environment, for example - you call someone a ****, it's
    either jokey or you've lost it and you're angry at them, and they can laugh
    at you and complain to HR about the naughty word. If you call them a clown,
    it's a dispassionate[1] assessment of their worth and credibility, you're
    laughing at them and there's no naughty words to report you for.

    [1]No-one ever uses clown when they're angry.
     
    platypus, Jan 23, 2007
    #32
  13. SD

    Eddie Guest

    .... just remember not to say FOYRNB at the end.
     
    Eddie, Jan 23, 2007
    #33
  14. SD

    SD Guest

    Ends in 507?
    Two-ish suit you?
    Us indigenous types don't need to go through immigration.
    --
    | ___ Salad Dodger
    |/ \
    _/_____\_ GL1500SEV/CBR1100XXX/CBX1000Z
    |_\_____/_| ..87918../..23274.../..31893.
    (>|_|_|<) TPPFATUICG#7 DIAABTCOD#9 WG*
    |__|_|__| BOTAFOT #70 BOTAFOF #09 PM#5
    \ |^| / IbW#0 & KotIbW# BotTOS#6 GP#4
    \|^|/ ANORAK#17 IbB#4 YTC#4 two#11
    '^' RBR Clues: 00 Pts:0000 Miles:0000
     
    SD, Jan 23, 2007
    #34
  15. I knew you were a National Treasure but I didn't know you could ride a
    bike on water rather than using the Blackwall Tunnel checkpoints ;-)
     
    Paul Corfield, Jan 23, 2007
    #35
  16. SD

    Robbo Guest

    Number mentioned above is correct.
    If she's in I'll have SWMBO put kettle on around 2 ish.
     
    Robbo, Jan 24, 2007
    #36
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.