Datatool alarm on Triumph Speed Triple

Hi!

I have a '03 speed triple with the datatool series 3 alarm accessory
fitted on it. It was fitted by my local dealer and after i got the bike
back i noticed that there was a recommendation in the users guide to set
a pin code on the alarm. The problem is that to set the initial pin code
i have to remove the "In-line fuse" and i can't find it. I have followed
all cabels from the alarm and i can't find any special fuse for the alarm.

I have a fragment of the fitting instructions and the only thing i can
find about the fuse is:

"The alarm is protected by the fuse shown in the motorcycle fuse box."

The Speed Triple have 10 fuses in the fusebox and noone is labeled
"alarm" or something like that.

Does anyone have any idea which fuse in the fuse box to remove when
setting the pin code?

/Marcus

 

Pull out the fecking lot then !


--
-
-

Robbo
1500GL 1988 Goldwing (Rebuild in process)
BotaFOF #19
E.O.S.M 2001/2002/2003
B.O.S.M 2003
FURSWB#1 KotL
YTC449
PM#7

\= /=
\= / /=
\ \= / /=
\\\' , / //
\\\//, / //,
\_-//' / / /<,
\ /// <//`
/ >> \\\`__/
/,)-^>> _\` \\\
(/ \\ //\\
// _//\\\\
(( ((

 

Alreay tried that. However after your reply i went out and tried one
more time and this time i managed to find the right one. I must have
made something wrong the first time.