Conditioner for Leather Jackets

Discussion in 'Australian Motorcycles' started by Yomama, Jan 24, 2005.

  1. Yomama

    John Littler Guest

    <missed this bit in previous answer>

    Hmmm, you must have a different relationship with sheep to me, I've
    never found the smell of lanolin terribly pleasant.

    Lanolin as extracted from sheep's wool has always been presented as a
    thin liquid oil at room temperature in my experience, I've never seen it
    any other way in unadulterated form.

    Lanolin as presented in most commercial uses is heavily perfumed hence
    why it would smell nice, that's why perfume is used for - covered up the
    smell of stinky bits* :)

    JL
    *That should get the wimmin going
     
    John Littler, Jan 25, 2005
    #21
    1. Advertisements

  2. Yomama

    glitch1 Guest

    Ge-Wy Leather Dressing (saddlers/ leather merchants like Lefflers and Sons/
    South Melbourne).
    Brilliant stuff, just rescued a horse-saddle from going to the tip with it.
    Call Saddlery Trading Company 1800 777 249.
    Made by GE-WY products in Singleton/ NSW.

    Afterwards a good coating with sno-seal (warmed up in hot water/ microwave/
    oven to makle it sorta runny), leave in "moderate" sunshine for a few hours
    to make it soakin properly before polishing off.
    If it has to be re-coloured, rub down jacket with acetone, then re-colour
    with Raven Oil (suppliers as above), 2 coats with drying in between, then
    the above procedure (Ge-Wy and Sno-Seal) after 48hr dry-out.

    cheers
    pete
     
    glitch1, Jan 26, 2005
    #22
    1. Advertisements

  3. Pat Heslewood, Jan 27, 2005
    #23
  4. Yomama

    GB Guest

    Ya wouldn't have to. It's kinda like those bloody
    Boeings: If you fly 'em far enough (past about 9 hours
    in a B767 from memory), you reach a point where you
    have to carry fuel to carry fuel.

    So all the way from the UK, you'd prolly end up with
    2 pounds of Hide Food left - the rest burns off along
    the way.

    G
     
    GB, Jan 27, 2005
    #24
  5. Oh, Mr Slave, I'm sure you wood!

    Hammo
     
    Hamish Alker-Jones, Jan 27, 2005
    #25
  6. Yomama

    rascal Guest

    Stuff I bought from Walden-Miller (and I guess they know a bit about leather) is
    called "GE-WY Leather Dressing" made by GE-WY Products of Wickam NSW. Come sin
    a small tin (220g) and is a pink jelly like goo (in the cool weather.)
    Purports soften, preserve and waterproof, and to be good for saddlery, harness
    gear, footwear, clothing, funiture, gloves, bags and hair loss. I've been using
    it on my jacket for a few years now and have no complaints. The suggested
    application is using a soft cloth, but I just hang the jacket in the sun to warm
    it then rub the stuff in using my leather gloves. 2 birds, 1 stone I figure.
    seems to work.
    where to buy it? dunno I haven't run out in 5 yrs so I haven't looked lately.

    good luck
    rb
    GS1100G
    “growing old is inevitable, growing up is optional”
     
    rascal, Jan 28, 2005
    #26
  7. Yomama

    Gary Woodman Guest

    and then...
    My leather lady said that animal fat rots cotton stitching. I have heard
    this story several times over the years. Perhaps it doesn't matter now, as
    everyone uses synthetic thread in leathers.

    Gary
     
    Gary Woodman, Jan 31, 2005
    #27
  8. Yomama

    John Littler Guest

    True, but then ask her why it wasn't sewn properly with beeswaxed thread.
    My sister has bridles we made 25 years ago with waxed cotton thread,
    still happily being used, no rotten stitching.

    JL
     
    John Littler, Jan 31, 2005
    #28
  9. Yomama

    Gary Woodman Guest

    My Shoei jacket[1], made in Pakistan? I doubt anyone would know
    that.
    And regularly Dubbined, I presume... a bit hard to re-wax thread.
    I'll
    ask her next time I see her (but I think she's gone back to
    Canada,
    sigh).

    Gary

    [1] 20 years old this year
    --

    Mark Latham, former Leader of the Alternative Liberal Party: "My
    message
    to the business community is that Labor is pro-growth and
    pro-productivity."
     
    Gary Woodman, Feb 1, 2005
    #29
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.