CL350 Honda

Discussion in 'Motorbike Technical Discussion' started by Fred Flintstone, Oct 18, 2007.

  1. Fred Flintstone

    Fred Flintstone Guest

    I have a CL350 Honda. I replaced the carbs, and now I have a VERY
    strange problem. On the right side of the engine, the bike will start,
    but you can tell by holding the exhuast pipe on the right side, it is
    not firing. If i take off the plug wire on the right side and hold it
    3/4 of an inch away, with the electric 3/4" zap, the cylinder fires
    and the bike idles and runs fine. Any ideas?
     
    Fred Flintstone, Oct 18, 2007
    #1

    1. Advertisements

  2. Fred Flintstone

    Dave Guest

    Probably wouldn't hurt to replace the plug(s) if you haven't done so.
     
    Dave, Oct 18, 2007
    #2

    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. CL350 Keihin CV Carb questions

  2. 1969 Honda CL350 Doesn't Go Above 40mph

  3. cl350 spark plugs

  4. cl350 recomended tire pressure?

  5. CL350 rear sprocket stuck

  6. honda cl350 flat spot issue

  7. Honda Honda Honda Honda

  8. FS: Beautiful 73 Honda CL350 in SF

Loading...