Hey Platy, I have a loverly box o' bits in me lounge as we speak... Progressive springs, 2 new silencers, ana head-gasket kit... I am mostly happy ..... So where do I get a cast head from? Only R80RT owners need reply..... -- O 1 Black, shortly to undergo extensive surgery. 1 Red, undergoing lightweight surgery. ----- 1 Blue, for Power-Ranger baiting. | o | Numbers ... | o | Stuff ... | ooo | Life ... -----
Thanks, no seriously, THANK YOU for your input... -- O 1 Black, shortly to undergo extensive surgery. 1 Red, undergoing lightweight surgery. ----- 1 Blue, for Power-Ranger baiting. | o | Numbers ... | o | Stuff ... | ooo | Life ... -----
Thanks Luv, kisses in the post... -- O 1 Black, shortly to undergo extensive surgery. 1 Red, undergoing lightweight surgery. ----- 1 Blue, for Power-Ranger baiting. | o | Numbers ... | o | Stuff ... | ooo | Life ... -----
Would it be RIGID and, er fairly cheap? -- O 1 Black, shortly to undergo extensive surgery. 1 Red, undergoing lightweight surgery. ----- 1 Blue, for Power-Ranger baiting. | o | Numbers ... | o | Stuff ... | ooo | Life ... -----
I don't know whether I've mentioned this before, but I find you more and more attractive every day..... -- O 1 Black, shortly to undergo extensive surgery. 1 Red, undergoing lightweight surgery. ----- 1 Blue, for Power-Ranger baiting. | o | Numbers ... | o | Stuff ... | ooo | Life ... -----
Gosh. What's this big stiff thing in my trousers? Oh. Oops. -- Platypus - Faster Than Champ VN800 Drifter, R80RT DIAABTCOD#2 GPOTHUF#19 BOTAFOS#6 BOTAFOT#89 FTB#11 BOB#1 SBS#35 ANORAK#18 TWA#15
Using the patented Mavis Beacon "Hunt&Peck" Technique, Hog Looks pretty straightforward <glances admiringly at brand spanking new CNC mill>. I'd need to run some measuring stuff over it to make a drawing, that I could then make <glances admiringly at brand spanking new CNC mill>. Cost of materials, basically. Get a few signed up[1] and get me a look at the original and you're on. <glances admiringly at brand spanking new CNC mill>. [1] There will be a minimum buy on the material.
You could sell a *few* for £50 a time I reckon. It could be improved BTW, neatened up. There would be pre and post Mono versions.
Using the patented Mavis Beacon "Hunt&Peck" Technique, Hog I'm not looking to sell any, as such. I'm happy to knock a couple out for UKRMers, and if they want to get others involved to spread the cost of materials, that's cool. This is a hobby, not a business. And I really, really don't want it to become one.
Using the patented Mavis Beacon "Hunt&Peck" Technique, Hog ? Is it? Really? Odd, I thought it was an answer. Ah well. <returns to big pile of manuals>
Yippee! There's nothing wrong with the handling of my R80, but... it's a go faster bolt on and that's rare for an R80
Oooo! Tart up both Beemers with go faster stuff? How splendid! -- Gyp BOTAFOT#99, BotToS#4, UKRMT5BB '89 R80RT - intercontinental ballistic tourer '81 R65RS - hiding under a dust sheet '97 XLH1200 - weapon of muff disruption Take out the chemical loo to reply
Ok it's not then. Fear abated {)= I know you don't want to end up spending *all* your time making bits or straightening bits for UKRM
Using the patented Mavis Beacon "Hunt&Peck" Technique, Hog It's not the time taken that the problem, really. I'll do jobs on an 'as-and-when' basis. If I end up taking money for jobs, next thing I've got 'customers' hassling me for delivery. Then it stops being fun.
I, also, could be tempted. -- Platypus - Faster Than Champ VN800 Drifter, R80RT DIAABTCOD#2 GPOTHUF#19 BOTAFOS#6 BOTAFOT#89 FTB#11 BOB#1 SBS#35 ANORAK#18 TWA#15
Consider me signed on. Slowly I will replace everything on my R80. Anybody tried the 1000cc lightweight piston conversion from motorworks? Cheers,
