10.5"-11" shocks

Discussion in 'Motorbike Technical Discussion' started by Brady, Aug 7, 2004.

  1. Brady

    Brady Guest

    Would anyone have some shocks that may fit a Yamaha XJ1100J Maxim that
    are in the 10.5"-11" range? I have looked all over eBay and found
    some but they were eye top and clevis bottom. I need eye top and eye
    bottom. If anyone knows where I can get some shocks in that
    measurement range, please post it.

    Thanks,
    Brady
     
    Brady, Aug 7, 2004
    #1

    1. Advertisements

  2. Brady

    Mark Olson Guest

    You should post the measurement of the maximum width of the eye that
    you can accept, also the maximum/minimum diameter of the hole in the
    eyes that you want. Remember you can always sleeve down a hole that
    is too big for your bolts (assuming there is enough clearance between
    the center of the mounting holes and the swingarm/frame, etc.)
     
    Mark Olson, Aug 7, 2004
    #2

    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Cutting shocks shorter

  2. 70's Honda--rubber dust boots for front shocks

  3. 1971 CB175 Shocks

  4. need seat pad, rear luggage rack, and better shocks for Kaw EL250

  5. Air Shocks

  6. Rebuilding koni motorcycle shocks

  7. virago xv535 replace rear shocks? Advice needed

  8. Does anybody here know about classic Koni shocks?

Loading...